A2LA/ISO 17025:2017
Certificate # 3929.01
| AWS D17.1/D17.1M | Bend Testing |
| ASTM E18 | Rockwell Hardness (A, B, C, N, T, Y Scales) |
| ASTM E384, B578 |
Knoop (10, 25, 50, 100, 200, 300, 500, 1000 gm Vickers (10, 25, 50, 100, 200, 300, 500, 1000 gm |
| ASTM B117 | Salt Fog |
| ASTM E8/E8M, C633 | Tensile (20 – 60,000) lbf |
| ASTM D4060; MIL-STD-8625 | Taber Abrasion |
|
MIL-A-8625, MIL-DTL-5541; |
Wet Tape Adhesion |
| MIL-A-8625, MIL-DTL-5541 | Coating Weight |
| ASM Handbook Volume 9 | Metallography1 (Using Optical and Keyence Digital Microscopy) |
| ASTM E3, E1920 | Sample Preparation |
|
ASTM E112 (Comparison and |
Grain Size |
| ASTM E45 (Methods A and D) | Inclusion Content |
| ASTM E562 | Systematic Point Count |
| ASTM B487 | Coating Thickness by Microscopical Examination |
| ASTM E407 | Microetching |
| ASTM E340 | Macroetching |
| SOP 1017 | Alloy Depletion |
| SOP 1024 | Alpha Case |
| ASTM E1077 | Decarburization |
| ASTM E1077; SAE J423 | Carburization |
| ASTM F2111 | Intergranular Attack |
| ASTM E2109, E562 | Thermal Spray Coatings |
|
SOP 1200 – 1205; ASTM E1508; |
SEM / EDS |
|
Using the methods listed above in accordance with AWS 17.1/D17.1M |
Weld Procedure/Welder Qualification |
|
Using the methods listed aboved in |
Failure Analysis |
|
ASTM E1476, E572, E1085, E539, |
X-ray Fluorescence (XRF) |
| ASTM E1019 | Determination of Carbon and Sulfur |
| ASTM E1019, E1409, E1447 | Determination of Oxygen, Nitrogen, and Hydrogen |
| ASTM E1351 | Field Metallography Replicas 1 |
| ASTM E1086, E415, E2994 | Optical Emission Spectroscopy (OES) (Al, As, C, Co, Cr, Cu, Fe, Mn, Mo, N, Nb, Ni, P, S, Sb, Si, Sn, Ti, V, Zr) |
Nadcap
| AC7101/2 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Chemical Analysis (to be used on audits on/after 22 March 2015) |
| AC7101/2 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Chemical Analysis (to be used on audits on/after 22 March 2015) |
| (F) Atomic or Optical Emission Spectroscopy (AES or OES) |
| (F3) Atomic Emission Spectroscopy – Spark/Arc (S/A–OES) |
| (G) Elemental Analysis (Combustion or Fusion) |
| (G1) – Carbon |
| (G3) – Nitrogen |
| (G4) – Oxygen |
| (G5) – Sulfur |
| Fe Base for Accreditation |
| AC7101/3 Rev D - Nadcap Audit Criteria for Materials Test Laboratories – Mechanical Testing (to be used on audits on/after 4 December 2016) |
| (A) Room Temperature Tensile |
| (XN) Bend Testing |
| AC7101/4 Rev F - Nadcap Audit Criteria for Materials Test Laboratories – Metallography and Microindentation Hardness (to be used on/after 14 August, 2016) |
| (L1) Microindentation (Interior) |
| (L10) Near Surface Examinations – Carburization / Decarburization |
| (L11) Grain Size |
| (L2) Near Surface Examinations – Alloy Depletion |
| (L5) Near Surface Examinations – Microindentation (Surface–Case Depth) |
| (L5X) Near Surface Examinations – Microindentation (Surface) (Chord Method ARP1820) |
| (L7) Near Surface Examinations – IGA, IGO |
| (L8) Near Surface Examinations – Alpha Case: Wrought Titanium |
| AC7101/6 Rev C - Nadcap Audit Criteria for Materials Test Laboratories – Corrosion (to be used on/after 28 August, 2011) |
| (Q) Corrosion (General) |
| AC7109/5 Rev F - Nadcap Audit Criteria for Coating Evaluations (Laboratory) (Req'd for all Coatings audits - except suppliers using Nadcap approved AC7109/5 labs) (to be used on audits on/after 15 April, 2015 and before 3 December 2017) |
| Bond Strength – Tensile |
| Hardness – Scratch |
| Metallography/Microstructure |
| Microindentation Hardness – Vickers |
| Thickness – Metallographic |
| ISO/IEC - Currently accredited by an ILAC approved source |
GE S-400
|
AIXZ, AI0A, AI0F, AI0L, AI0M, AI0Q, AI0R, Taber Abraison test D4060, Participation in the |
|
E50TF133-S11 - Grain Size Evaluation |
Common Industry Standards &
MIL Specs
| AMS 2471 | Salt Fog |
| AMS 2473 | Salt Fog |
| AMS 2474 | Salt Fog |
| AMS 2482 | Salt Fog |
| ASTM D2240 | Durometer Hardness |
| ASTM E140 | Standard Hardness Conversion |
| ASTM E290 | Bend Testing |
| ASTM D3363 | Hardness - Scratch Pencil |
| ASTM Vol. 9 | Optical - Keyence Digital |
| ASM Vol. 12 | SEM/EDS Analysis |
| ASM Vol. 11 | Failure Analysis |
| A2LA R104 | Field Testing |
| MIL-W-6858D | Welding, Resistance: Spot & Seam |
| MIL-5541 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
Pratt Whitney
7a and 7f Evaluations Per F-23 for P&W End-Use Customers
Pratt Whitney Canada
| CPW 387 | Powder, plasma spray, nickel alloy |
| CPW 388 | Powder, pre-alloyed, plasma spray. Zirconium oxide – Yttrium Oxide |
| CPW 442 | Microstructure Standard for thermal barrier plasma spray coatings |
| CPW 672 | Coating, plasma spray, oxidation protection and thermal barrier |
Rolls Royce
| CME5033/5/E1 | Surface standards for laser machining |
| RRP 55000 | Non-conventional Machining |